Why They Go On Before Anything Else

Lights Up as You Roll

The tube lights as the wheel spins and switches itself off once you stop.

flare

Motion Activated

On in Ten Seconds

Unscrew the cap that is there now, screw this one on. That is the whole install.

build

No Tools, No Wiring

Match Your Build

Red, purple, blue, green or yellow, four matching caps in every set.

palette

Five Colours

Sealed and Weatherproof

A sealed tube over the valve, so rain, dust and washes are no problem.

water_drop

Built for the Road

Filmed on real wheels

What They Look Like Once You Are Moving

Fitted, spinning and lit, on cars, bikes and motorcycles.

A full ring of colour once the wheel spins Video by @guicho1596
Screwed onto the valve in a couple of seconds Video by @qh1b7aw6o5
On a bike wheel, lit the moment it turns Video by @snugglebowl_uk
A blue ring of light on a motorcycle wheel after dark Video by @nepali_modification_hub
The lights in hand before they go on Video by @taklry
Red, fitted to a car wheel Video by @user2516304549548

Clips shared by their creators and used with permission.

Glowing Before You Finish the Driveway

Four lights, nothing to wire and nothing to charge.

How It Works

1

Unscrew the tail and pull the tab

Twist the tail off the light and take out the little white paper tab. It protects the battery in transit and keeps the light switched off.

2

Put the battery back

The plus side faces down. Screw the tail back on, give it a shake and it lights up.

3

Screw it onto the valve

Twist off the cap on your valve stem and hand tighten RimGlow in its place until snug.

4

Repeat on each wheel

One light per wheel, so every wheel is lit instead of just one.

5

Drive off

Once the wheels turn the lights come on by themselves. Nothing to switch, nothing to remember.

Pull Up and Let Them Look

Four lights, ten seconds, and your wheels never look stock again.

A Streak of Colour on Every Wheel

  • As the wheel spins, the lit tube draws a bright arc of colour.
  • Four lights in the set, so every wheel matches.
  • Easy to spot after dark, on the road or parked up at a meet.
  • Off once you stop, so nothing drains while it sits.

Nothing to Wire, Nothing to Charge

  • No cutting, no splicing and no trip to a shop.
  • A button cell sits inside each light and is replaceable.
  • Screws onto the standard valve stem on cars, bikes, e-bikes and motorcycles.
  • Takes the place of a cap you were never going to miss.
Meet the cap

One small tube, a whole wheel of colour

Sealed Tube

Closed over the valve so rain, dust and washes stay out.

Spins to Switch On

Motion brings it on, standing still turns it off.

Sealed Tube

Closed over the valve so rain, dust and washes stay out.

Spins to Switch On

Motion brings it on, standing still turns it off.

Button Cell Inside

Already fitted and replaceable, with nothing to charge.

Standard Thread

The same fitting as the cap you are taking off.

Button Cell Inside

Already fitted and replaceable, with nothing to charge.

Standard Thread

The same fitting as the cap you are taking off.

The Easiest Gift for Someone Who Loves Their Ride

Small enough to wrap, fitted in seconds, and noticed every night after dark.

RimGlow vs. the Caps on There Now

What changes when you swap four plastic caps you never think about.

RIMGLOW
  • Glows every time the wheel turns
  • Fitted by hand in ten seconds
  • Five colours to match your ride
  • Seals the valve just like a cap
  • Costs about one car wash
STOCK CAPS
  • Sits there doing nothing
  • Nothing to fit, nothing to see
  • Black plastic
  • Seals the valve, nothing more
  • Came free with the car
VS

Light Up Every Wheel

A set of four lights, your colour, free worldwide shipping.

They fit American (Schrader) and British (Dunlop) valve stems, which is what almost every car, motorcycle and scooter uses, and most bikes too. They do not fit French (Presta) valves, the narrow type on road bicycles. We would also not fit them to 90-degree angled valve stems.

No. You unscrew the cap that is on there and hand tighten these in its place. Nothing is cut, spliced or plugged in.

While the wheel is turning. They switch themselves off once you stop, so nothing is lit while you are parked.

Every light ships with a small white paper tab inside to protect the battery, and it stays off until you remove it. Unscrew the tail, take the paper out, check the battery sits with the plus side facing down, screw it back together and give it a shake. If it still does not light, message us and we will sort it out.

No. Each cap runs on a small button cell that is already fitted and can be replaced.

The body is sealed over the valve, so rain, dust and washing are fine. We would not aim a pressure washer straight at them.

They seal the valve the same way the original cap does. Tighten each one by hand until it is snug, and check your pressures as you normally would.

Free worldwide shipping takes 8 to 15 business days and comes with tracking. Skip the Line shipping is available at checkout for $6.99. Any import duties are not included.

Questions Before You Fit Them

Pick Their Camera